removed the column from the left side of the forum vb 5.3.3

[bennour]

hello

I would like to removed the column from the left side of my forum vb 5.3.3 as shown by both photos. photo 1 the current face and the column to be removed is indicated by the red arrow ; photo 2 the face I want to have without a column.

[In Omnibus]

Go into SiteBuilder / Edit Page and either move or delete the modules in the left column.

[In Omnibus]

You may also want to change the page layout to "Full Width"

[bennour]

Go into SiteBuilder / Edit Page and either move or delete the modules in the left column.

where i fund the siteBilder ?

[Mark.B]

Edit Site, top right.

[Wayne Luke]

Edit Site, top right.

Top left if you're using an RTL language.

[Mark.B]

Top left if you're using an RTL language.

That'll teach me to check the first post before replying to a later one...ho hum....

[bennour]

Top left if you're using an RTL language.

I searched on my hosting site I found nothing, I looked on my admincp of my forum I found nothing, I looked on my forum I found nothing, of which site you speak , I did not understand, is what I'm looking for on my hosting site which is installed my forum or I'm looking on admincp of my forum, I'm not strong I'm almost a beginner, please slowly, little by little, please more detail, I do not know where to start and where go exactly . I apologize for my weakness.
thank you

[Wayne Luke]

vBulletin. We only refer to vBulletin. You have to be logged in as an Administrator.

[bennour]

thank you for the explanation

I entered as admin on my forum, but there is no edit site as you showed me; Here's the photo

i use windows 8.1

[Wayne Luke]

Then you don't have permission to use Site Builder. If you're the owner of the site, you should give yourself permission to use Site Builder in the AdminCP under Usergroups -> Administrator Permissions. If you're not the owner, then you should ask the owner to give you permission.

[bennour]

hello
the problem is solved ; I had two names administrators admin and my own name and I worked with my own name which has for id = 2 and this name did not have permission to see the line at the top edit site, after modification of the config file all is well good .
thank you very much for your help and your good orientation